Facebook YouTube LinkedIn

ProTouch® AutoGloss

The PDQ ProTouch AutoGloss 3-Brush Soft-Touch Rollover.

The Gen5 Intelligent Brush Control monitors over 20 system metrics.

The ProTouch AutoGloss - a better choice in vehicle washing.

Overview

The PDQ ProTouch AutoGloss is a three-brush gantry-style system that offers superior aesthetics, a larger wash envelope, and next generation brush control precision. The ProTouch AutoGloss was engineered to deliver incredible cleaning results using several "industry first" innovations that are unsurpassed by any other gantry-style rollover on the market today.

System Includes

  • Aluminum gantry frame
  • Blue foam wash material
  • Gen5 Intelligent Brush Control™
  • Top ultrasonic profiling
  • Primary stainless spray manifold with mirror coverage
  • Wall mounted ProFlow™ pressurized off-board fluid system with primary water inlet, brush lube, foaming detergent, drying agent and rinse
  • ProLoad™ consumer parking system with LED colorized signs and audio
  • Maximum length steel floor rails
  • Floor anchors
  • Wall mounted pre-loaded e-chain w/bulkhead
  • Cortex ready
  • Basic cover kit
  • System stop button
  • Software weep
  • Dealer/Fleet, Basic 2-Pushbutton Wash Activation with Stand
  • Remote control for maintenance/diagnostic troubleshooting
  • Web Browser interface for configuration and setup
  • Email/Text messaging capabilities

Key Features

  • Soft foam brushes versus cloth brushes
  • Will Wash Vehicles up to 90 inches high
  • ProFlow Pressurized Fluid System
  • No attendant required
  • Virtual Treadle - No floor activation device required
  • Remote, Real-time System Monitoring
  • Simplified Installation and Low Maintenance Equiment
  • Energy-Efficient Systems
  • Supportive Local Distributor Service Network
  • 24/7 Technical Service Support
  • 12 Month Parts and labor Warranty
  • 2 Year Drive Train Warranty

Specifications

Building Requirements Minimum Recommended
Height 10'-6" 11'-0"
Width 13'-6" 16'-0"
Length 32'-9" 35'-5"

Note: Equipment dimension specifications do not take into consideration any obstructions, unusual wash bay configurations, etc. **Rails can be cut to length for shorter bays.

Utility Requirement
Air 1.5 SCFM @ 90 psi (6.21 Bar)
Water 20 GPM (75.7 LPM) @ 10-80 psi (0.69-5.52 Bar) with ProFlow Pump Station
25 GPM (94.6 LPM) @ 30 psi (2.07 Bar) Adiitional for High Pressure Pump Station
Electrical 40A @ 208/230V 3PH 60Hz for base machine
100A @ 208/230V 3PH 60Hz for base machine with wheel scrubbers and 2-producer dryer

Drying Options

2 Producer SwingAir Integrated Dryer (09040134)

  • Touch-free dryer
  • Driest car possible in all climates
  • Two 7.5HP motors (15HP total)
  • Completely integrated into gantry - ideal for smaller bays
  • Oscillating feature to sweep water from the surface of the vehicle

4 Producer Total - (2 SwingAir + 2 Fixed Side) Integrated Dryer (09040132)

  • Touch-free dryer
  • Driest car possible in all climates
  • Four 7.5HP motors (30HP total)
  • Completely integrated into gantry - ideal for smaller bays
  • Oscillating feature to sweep water from the surface of the vehicle
  • 32" wider drying envelope with repositioned outside producers
  • Better drying on sides of vehicles with inward-angled outside producers

Accessories

  • Low Pressure Drive Thru Undercarriage (09120008)
  • Booster Pump (Repressurization pump) (09070145)
    2HP SST pump, 42GPM@38psi, 3-PH 60Hz - Used for low pressure sites or for pressure feeding from fresh water/RO holding tank.
  • 2 Producer SwingAir Integrated Dryer - 15HP (09040134)
  • 4 Producer Total - (2 SwingAir + 2 Fixed Side) Integrated Dryer - 30HP (09040132)
  • Reverse Osmosis System 3000 GPD, Equipment Room, 115V, 60Hz, 14Amp, Single Phase* (09220011)
  • Water Reclaim System - 30 GPM Water Recovery System (09220048)

Request More Information

Looking For More Information?

Please provide your information below for more details.